– Getting Started & Next Steps

The Importance of Colors of Underground Utility Lines

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

If you see white lines, then these are proposed excavation sites. Area that will be excavated in the future are marked.

Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.